EU Compliance for Chinese Suppliers: CE, DoC, GPSR

EU Compliance for Chinese Suppliers: CE, DoC, GPSR By Zoey Zhang, Founder & Lead Sourcing Specialist EU Compliance 2026-09-16 Quick Answer Before goods leave China, verify six things per SKU: which EU directive or regulation applies, whether the Declaration of Conformity names the correct manufacturer, product and current standards, whether the test reports cover the exact model and configuration being bought, whether the lab was accredited for those standards, and whether the label carries the importer details EU rules require. Checking after the container arrives means paying for the fix yourself. Last updated: 2026-09-16 Watch the full video Table of Contents There is a specific moment in every China-sourced project when compliance stops being paperwork and becomes money: when the container arrives and somebody finally reads the test report. By then the options are expensive. The goods are in your country, the factory has been paid, and the report covers a model you did not buy. Compliance is the cheapest thing to fix in China and the most expensive thing to fix in Europe — and the window to fix it closes when the goods are loaded. The eight-point check, per SKU Not per order, not per supplier: per SKU. A supplier with twenty products will have a clean file for two of them. CheckWhat you are looking forLegal basisWhich directive or regulation the product falls under — and whether CE marking is even applicableDeclaration of ConformityManufacturer name and address, product identification, directives and standards cited, signatory, dateTest reportsThe exact model, variant and voltage you are buying, tested to current standardsModel matchReport model numbers against the invoice, the label and the inspection photosLab accreditationCNAS accreditation and ILAC-MRA recognition for those specific standards, or a notified body where the category requires oneSubstances and wasteRoHS 2011/65/EU, REACH, WEEE and packaging EPR registration in the destination countryLabels and manualsCE mark size and placement, importer name and EU contact, warnings in the destination languageImporter dutiesTechnical documentation kept for ten years, responsible-person details available to market surveillance Six reasons a CE file gets rejected Pattern recognition from inside the supply chain — none of these are rare, and none are visible if the only question you ask is “do you have CE?”. 1. The report covers another model. A sister product with a different power supply, housing or radio module. The test was real; it does not apply to what is shipping. 2. There is no report at all. “CE” printed on the label, the artwork and the carton, with nothing behind it — common on accessories that inherit a parent product’s mark, and on low-value consumer goods. 3. The standards are superseded. A 2019 report citing a standard that has since been replaced. The test no longer demonstrates conformity to today’s harmonised list. 4. The lab was not accredited for that standard. Cheap and fast, and worthless the first time it is challenged. Accreditation scope must be checked for each cited standard, not just for the lab’s existence. 5. The report disclaims its own use. Phrases like “for reference only” or “not intended for CE marking” appear in reports that are still circulated as the compliance document. 6. The declaration is hollow. Directives listed but no standards, no manufacturer address, no technical-file reference, no authorised representative. Which rules apply to what you are buying Product categoryApplicable rulesElectrical and electronic goodsLVD 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU, WEEE 2012/19/EURadio / wireless equipmentRED 2014/53/EU, including the cybersecurity requirements and the harmonised standards that back themMachineryDirective 2006/42/EC until 19 Jan 2027 → Regulation (EU) 2023/1230 applies from 20 Jan 2027Construction productsConstruction Products Regulation (EU) 305/2011Consumer products generallyGPSR (EU) 2023/988 since 13 December 2024, REACH, packaging EPRToys, PPE, batteriesToy Safety Directive 2009/48/EC, PPE Regulation (EU) 2016/425, Battery Regulation (EU) 2023/1542 Two entries on that table have recently moved, and both catch importers mid-project. GPSR (EU) 2023/988 has applied since 13 December 2024 to consumer products placed on the market — whether sold in a shop, a webshop or a marketplace. It puts duties on importers before the product is placed on the market: verify the manufacturer has complied, add your own name and contact details, and keep a copy of the technical documentation for ten years. Regulation (EU) 2023/1230 replaces the Machinery Directive on 20 January 2027 with no transition window. A Declaration of Conformity that still cites the directive will not be valid for machines first placed on the market from that date. If you are buying machines from China now, the documentation you commission in 2026 should already reference the Regulation. What the importer carries The comfortable misconception is that compliance belongs to the manufacturer. In EU law, placing a product on the market under your own name or brand shifts manufacturer obligations onto you, and the importer has its own duties regardless. In practice, as importer you should be able to answer these without asking the supplier: Which EU rules apply to this SKU, and which standards demonstrate conformity? Where is the current Declaration of Conformity, signed, with the manufacturer’s address? Where is the technical file, and can it be produced within the deadline a market surveillance authority sets? Who is the EU-based responsible person, and is their contact on the product or packaging? If the product is radio equipment, which harmonised standards cover its cybersecurity requirements? If any answer requires an email to China, the file is not finished. Where compliance sits in the sourcing process The sequence that avoids the expensive scenario: Before the order — identify which EU regime applies to each SKU, because it changes the specification you buy against. Before the deposit — request the documents. A supplier who cannot produce a report before being paid will not produce one afterwards. During production — audit the file properly: model match, standards currency, lab accreditation, label artwork. At pre-shipment inspection — verify the CE label and importer details on the actual production units, photographed, against the corrected file. At export — make sure the export declaration and certificate of origin match the product identity in the compliance file. Step 4 is where the two workstreams meet. A compliance file that has never been compared with the physical goods is an assumption, not evidence — which is why we inspect the label, the packaging and the manuals on the line, in the same visit as the AQL sampling. What we do, and what we deliberately do not We do: map each SKU to the applicable EU regime, audit the supplier’s documents against the current harmonised standards, coordinate accredited third-party lab testing where the file cannot be saved, push remediation back to the factory, and hand you a per-SKU gap list naming the standard, the missing item and the fix. We do not: issue CE certificates, act as a notified body or serve as your legal EU authorised representative. The declaration stays with the manufacturer, or with you as importer — that is where EU law places it, and any agent claiming otherwise is selling you a document that will not survive contact with a market surveillance authority. If you are not sure which certificates a product needs even to leave China, start with our free export certification lookup, then read the full compliance service page. Send test reports, declarations and product photos for a specific SKU, and you get the gap list back within 2-5 working days — before the goods are packed. 👉 WhatsApp: +86 139 2270 2227 ｜ Email: sales@cantonmade.com Next step Need a quote or a technical answer? Tell us the product and the quantity. Our team in Guangzhou sends back pricing, MOQ and lead time within one business day. Chat on WhatsApp Get a free quote Email our team Guangzhou-based sourcing team · Replies in English within 1 business day Share this guide: Keep ReadingRelated sourcing guides China Europe Rail China–Europe Rail Freight: 16–18 Days, Planned Right Our ServicesSourcing services to match Product Sourcing Find & vet factories for any product Quality Control AQL inspections, pre-shipment checks Factory Audit On-site verification before you pay Shipping Door-to-door freight, all incoterms Back to All Guides Need Help Sourcing? Contact Us